Output With Finisher - Konica Minolta 7222 User Manual

Output Mode for Machine without Finisher (continued)
1.
When using E-SORT+Sort or E-SORT+Group mode, load the same
paper size into two trays in different orientation.
Stack mode is initially selected. Key Operator can change the initial output
mode. See p. 13-11 to p. 13-13.
2.
Select the desired output mode.
Touch the desired output mode key to highlight it.
To select Stack mode, deselect all the keys.
3.
Select additional copy conditions, as desired.
4.
Enter the desired print quantity from the control panel keypad.
• See p. 10-3 to be sure that the exit tray capacity is not exceeded.
• See p. 3-7 for details on setting print quantity.
5.
Position original(s) FACE UP in the document feeder or FACE DOWN
on the platen glass.
See p. 3-2 to p. 3-6 for details on positioning originals.
6.
Press [START].
Press [STOP] to suspend the scanning or printing job.
When the paper exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit; otherwise,
mishandled paper will occur.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-33