Konica Minolta 7222 User Manual page 302

[18] Key click sound
When this feature is Low or High, the machine activates a buzzer sound when the
touch sensitive screen is touched or any key is pressed. This confirms the machine
recognition of the selection.
[19] Job memory recall
This feature allows the machine to initialize using selections stored in job memory
No.15 when the power is turned on or the [AUTO RESET] key is pressed.
NOTE:
This function works only when job memory No.15 is registered.
[20] Sheet insertion
This setting allows selection of tray 1, tray 2, tray 3, tray 4, LCT, or Bypass as the
source of the inserted sheets.
[21] A5 orig. type
Selects orientation of A5 size originals.
Options: Landscape or portrait.
[22] Rotation
When turned on the feature allows the machine to automatically rotate an A4 original
image to match the manually selected paper size. For example, if an original is placed
in the RADF or on the platen glass in the A4R position and the A4 paper size is
selected, the machine will rotate the image to fit the A4 paper.
[23] 1 SHOT indication time
Determines the duration of messages that are displayed, i.e., 50 SHEETS MAXIMUM
IN STAPLE MODE. Options: 1/ 2/ 3/ 4 or 5 seconds.
[24] AUTO START
This feature allows the machine to start the copying operation as soon as the document
feeder/platen cover is closed down over the platen original.
[25] No-printing timer
Set the timer to allow the printing job to start after operating the copying job.
[26] Power save key
Select the power saver mode to be activated by pressing [POWER SAVER ON/OFF]
key.
[27] Bypass tray size
Select the paper size detectable on the Multi-sheet bypass tray.
[28] Letter Head
This setting allows selection of tray 1, tray 2, tray 3, tray 4, or none as the source of the
letterhead paper so that the top of the image data of the reverse side always comes
under the letterhead in duplex copying. When using this function, load the letterhead
paper with the letterhead side FACE DOWN.
NOTE:
This function is not factory-set. Contact your service representative, if desired.
[29] APS priority
Sets the priority tray in APS mode.
[30] Rotation copy of enlarge
When turned on the feature allows the machine to automatically rotate and enlarge an A4
B5 original image to match the short-edge-feeded A3 or B4 paper size.
13-46
[12] Memory Switch (continued)
or