Konica Minolta 7222 User Manual page 151

Programmed Shut-Off (Weekly Timer) (continued)
If an invalid password is entered, continue by entering the valid 4-digit
password.
3.
Press [START].
The following message will be displayed on the Basic Screen.
Input copy time
0 hour(s) 05 minute(s)
4.
Set the duration for the interrupt use.
Enter a 1-digit hour (ex. 3 hours is 3) using the keypad on the control panel. (0 ~ 9)
5.
Press [START].
6.
Set the minute for the interrupt use.
Enter a 2-digit minute (ex. 7 minutes is 07) using the keypad on the control panel.
Entering a number smaller than 5 will set the time to 5 minutes.
7.
Press [START].
Copying is available until the set time is expired.
8.
When Timer Interrupt of the copier is finished, press [POWER SAVER
ON/OFF] for one second or longer, then release it.
The copier returns to the OFF condition and copying is again disabled.
Weekly
Timer
Rotation
Vertical/Hori-
zontal Zoom
7
A dvanced
Information
7-3