Magnification - Konica Minolta 7222 User Manual

[3] Magnification

Set the magnification ratio you initially want to display after the user turns the power on
or after Auto Reset restores the Initial settings.
NOTICE:
This setting should not conflict with the Initial setting for Paper Tray. For
example, if APS is selected for the initial paper tray setting, a ratio setting
other than AMS will be ignored.
❒ Setting options: AMS; 1.00; ratio 0.25~4.00
System/Copier Setting Menu Screen
Procedure
1 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen, then touch 3.
Magnification to display the Magnification Initial Setting Screen.
2 The default setting is 1.00.
Select the desired setting from the Magnification Initial Setting Screen:
To select 1.00 if it is not already highlighted, touch 1.00.
To select another ratio, touch upper/lower arrow key to display the desired ratio, or enter
a 3-digit ratio using the keypad on the control panel.
To select AMS, touch AMS.
3 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen.
If other copier initial setting changes are required, touch the desired key.
4 Touch RETURN to restore the System/Copier Setting Menu Screen.
5 If no further changes are required, turn the machine power OFF then ON for normal
copying operations.
[2] Copier Initial (continued)
Copier Initial Setting Screen
Magnification Initial Setting Screen
Key Operator
Mode
System Initial
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-9