Turning On The Power Switch; To Turn On The Power - Konica Minolta 7222 User Manual

Turning On the Power Switch

To Turn On the Power

Usually, the main power switch should be kept ON so that the machine may function
as facsimile or printer.
The main power switch is located on the rear left side of the main body.
When the main power switch is turned ON, the main power indicator located on the far
left side of the control panel will go on.
When turning the main power switch OFF then ON,
power
before turning it ON again.
To turn ON the power by the power switch:
1.
Turn ON the power switch.
The power switch is located on the far left side of the control panel.
Warm-up takes approximately 19 seconds or less.
2.
The Basic Screen will be displayed.
The message on the Basic Screen will inform you that copying job is possible.
2-18
indicator located on the far left side of the control panel goes off
check that the main