Minolta Di 200 Advanced Information page 73

Initial Steps . . .
Using the Single Feed Tray (SADF)
The single feed tray can be used to feed originals that cannot be
processed using the duplexing document feeder. To use it, you have to
place the originals on the single feed tray one at a time.
Note the following important information!
Originals suitable for the single feed tray:
Type of originals:
Original size:
1 Lower the single feed tray cover.
2 Set the document guide to the size
of the largest original.
3 Place the original on the single feed
tray. The side that is to be copied
must be down.
The original is automatically taken
in and copied.
When can I load the next
?
document?
§ Do not load the next original until the [START] button on the control
panel lights green.
Not all functions are available!
When working with the single feed tray, not all functions are available.
For more information, see page 6-23.
Di200
• Single sheets of level, plain paper35g/m
• A3L to A5L
3
2 2
up to 200 g/m
3-11