Minolta Di 200 Advanced Information page 56

2
4 Shake the new toner bottle a few
times back and forth.
5 Carefully remove the seal from the
toner bottle.
6 Place the new toner bottle into the
toner bottle holder. Be sure the side
labelled "UP" on the toner bottle is
pointed upwards when doing so.
7 Close the cover of the toner bottle.
The copier will begin to refill the
toner supply. Do not switch it off
during this period. Do not open any
doors on the copier.
Copies still too light?
If copies are still too light immediately after replacing the toner bottle,
you can activate the toner replenisher function. For more information,
see page 5-28.
2-40
Getting to Know Your Copier
Di200