Minolta Di 200 Advanced Information page 131

Customizing Your Copy
5 Set the width of the file margin with
the arrow keys.
What must be considered?
?
The original will be printed on
the copy offset by the width of
the file margin.
§ If the file margin has been set
too wide, part of the image on
the copy may be lost.
6 Confirm your entries with [ENTER].
The auxiliary functions are shown
again.
§ If necessary, make additional copier settings. Start the copy cycle by
touching [START].
Combining file margin settings!
Settings: file margin left, file margin
width 0 mm
Result:
The 2nd original will be printed in
the same direction as the
1st original.
Settings: file margin above, file
margin width 0 mm
Result:
The 2nd original will be printed in
the opposite direction to the 1st
original.
Di200
4
4-49