User's Choice [2/6] - Minolta Di 200 Advanced Information

5

User's Choice [2/6]

1 Press the [UTILITY] key on the control panel.
The display will change.
2 On the touch screen, press [USER'S CHOICE].
The display will change.
3 Select the index key [2/6].
Original > Copy Default
Specify the Copy Mode to be enabled by default when the copier is
switched on or reset.
§
Select the desired Copy Mode.
The default setting is "1-sided > 1-sided".
If the default setting is set to 1-sided>2-sided or 2-sided>2-sided, an
additional button appears on the touch screen. This key allows you to
switch back quickly to 1-sided>1-sided mode.
Auto Paper/Auto Size
Specify the Copy Mode to be enabled by default when the copier is
switched on or reset.
§
Select between [AUTO PAPER], [AUTO SIZE] or [MANUAL].
The default setting is [AUTO SIZE].
5-6
Utility
Di200