Minolta Di 200 Advanced Information page 192

6
Symptom
The copy is blurry.
The image is
uneven.
The edge of the
copy is dirty.
The copy is badly
aligned.
6-2
Possible cause
The paper is damp.
The entire surface of the
original glass is dirty.
The original pad or
document transport belt is
dirty.
The original is very thin or
highly transparent.
The original is 2-sided.
The Original Pad is dirty.
Original is not placed in the
correct position.
The copy paper size is larger
than the original.
The zoom factor selected is
not correct for the copy
paper size.
Original is not placed in the
correct position.
The original is not suitable
for the document feeder.
The entire surface of the
original glass is dirty.
(When using the automatic
document feeder)
Troubleshooting
Action
Replace the paper.
Clean the original glass,
see page 7-1.
Clean the original pad and/
or document transport belt;
see page 7-1.
Place a blank sheet of paper
over the original.
Manually set the exposure
to a lighter level, see page 4-
45.
Clean the original pad;
see page 7-1.
Place the original on the
original glass correctly; see
page 3-15.
Select the same copy paper
size as the original.
Select a suitable zoom
factor for the copy paper
size; see page 4-21.
Place the original on the
original glass correctly; see
page 3-15.
Place the original into the
document feeder correctly;
see page 3-8.
Place the original on the
original glass, see page 3-
15.
Clean the original glass,
see page 7-1.
Di200