Minolta Di 200 Advanced Information page 58

2
Incorrect handling can cause damage to the copier!
When the right door (R1) is open, electrical contacts are within reach.
Touching the contacts can cause an electrostatic discharge, resulting in
damage to the unit.
§ Do not touch the electrical contacts.
1 Open the right door (R1).
2 Carefully pull the used imaging unit
out by the green hooks.
3 Take hold of the handle of the used
imaging unit and lift it carefully out of
its holder.
4 Shake the new imaging unit back
and forth horizontally a few times.
5 Align the green marks on the
imaging unit with the marks on the
copier. Put the new imaging unit into
the holder.
2-42
Getting to Know Your Copier
electrical contacts
Di200