Minolta Di 200 Advanced Information page 119

Customizing Your Copy
5 Set the file margin width of the
originals.
Confirm the selection with [ENTER].
6
The Original>Copy settings are
shown again.
§ If necessary, make additional copier settings. Start the copy cycle by
touching [START].
Combining file margin settings!
Settings: file margin left, file margin
width 0 mm
Result:
The 2nd original will be printed in
the same direction as the
1st original.
Settings: file margin above, file
margin width 0 mm
Result:
The 2nd original will be printed in
the opposite direction to the
1st original.
Di200
4
4-37