Minolta Di 200 Advanced Information page 149

Utility
Auto Shut Off
Specify the amount of time that should elapse after the last copy cycle or
user input before the copier is automatically shut off.
§
(Without printer controller)
Input a value between 15 and 90 minutes with the numeric keypad.
or
Press [NO RESET] if the copier should not be shut off automatically.
The default setting is [60 MINUTES].
§ (With printer controller)
Input a value between 15 and 240 minutes with the numeric keypad.
or
Press [NO RESET] if the copier should not be shut off automatically.
The default setting is [60 MINUTES].
The administrative management functions can be used to specify whether
auto shut off mode can be disabled using the User's Choice settings. For
more information, see page 5-33.
Applicable for Switzerland only!
To meet the E2000 regulations in Switzerland, when the device is
installed the default setting for activating Energy Save Mode (Auto
Shut Off) is to be changed from 60 minutes to 40 minutes.
LCD Back-light Off
Specify the amount of time that should elapse after the last copy cycle or
user input before the backlight for the touch screen is switched off.
§
Input a value between 1 and 240 minutes with the numeric keypad.
The default setting is [1 MINUTE].
Di200
5
5-9