Table of Contents
Advertisement
Navigating Programming Levels
Many of your fax machine's features and functions have
settings which can be changed to customize its operation.
These settings are accessed through different programming
levels: user functions, dial parameters, and service functions.
The user functions control a broad range of features, such as
when certain reports print and how the machine responds to
incoming calls.
The dial parameters control how the machine dials fax
numbers; in most cases, the settings are determined by the
type of telephone service you have.
Your Authorized Konica Dealer must change the service
functions.
Viewing Your Current Settings
The configuration report lists the current settings of all user
functions, among other things. Refer to the "Reports,
Configuration Report" section of this user's manual.
To print a configuration report:
1 Press the Select Function key.
2 Press the 6/Report Print One Touch key.
The display shows 1:ACTIVITY REPORT.
3 Using the numeric keypad, press 4.
The display shows 4:CONFIGURATION.
4 Press the Yes § key. The report prints.
User Function Settings
User function settings allow you to customize the general
operation of your fax machine. Refer to the following User
Function Settings List to determine which settings you may
need to change, then refer to the "Changing Your User
Function Settings" part of this section to make the change.
User Function Settings List
01 MCF(SINGLE-LOC.)
This function automatically prints a Message
Confirmation Report after each single-location
transmission or polling transmission. The report provides
information about the transmission. Refer to the "Reports,
Message Confirmation Report" section of this user's
manual.
Available settings are ON and OFF (default).
|
User's Manual
43
Advertisement
Table of Contents
