Control panel/touch panel
2.3.2
Saving the current settings as the default settings
1
Specify the desired settings, for example, for the Quality and Menu parameters, and then press the
[Mode Check] key.
2
Touch [Register].
3
Touch [Default Settings].
2.3.3
Storing the current settings
Storing a program
Destinations and scan settings can be saved as a program.
!
Detail
A maximum of 30 programs can be registered. However, the total number of one-touch destinations
and programs must not exceed 300.
A maximum of 210 destinations can be registered with a single program.
Instead of using the machine's touch panel, programs can be stored by using Assistant tool for C200
from a computer on the network. For details, refer to the User's Guide [Network Administrator].
1
Specify the desired settings, for example, for the Quality and Menu parameters, and then press the
[Mode Check] key.
2
Touch [Register].
C200
2
2-11