Table of Contents
Advertisement
KORG D16 Guide
Overview the PUNCH IN / OUT functions:
PITCH: The Manual and Auto Punch In/Out functions let you re-record specific sections seamlessly!
Manual - Punch In/Out on a selected track is easily accomplished by pressing the REC key or a footswitch
during playback - to instantly enter record mode.
1. Press the AUTO PUNCH key - in the display you'll see "In" and "Out" locations that you can set ahead
of time, using the STORE and IN/OUT keys.
PITCH: You can also set In / Out times by pressing the "Wave" button in the Auto Punch page - a great
feature that let's you set punch in / out times while viewing a waveform display! And you can easily - set Pre
and Post-roll times to specify playback time before and after recording!
Additional Features:
100 Scenes, 100 Mark points, 4 Locate points per song!
Store "snapshot" Scene automation of fader, pan, EQ and effect send levels, and name your scenes for easy
recall ! Create specific Mark points in the song structure, name them for convenient access to "Verse",
"Chorus", "G-Solo" etc., and immediately jump to these registered locations! Store four Locate points for
instant access to specific areas with front panel keys!
99 levels of UNDO:
Use the UNDO / REDO function to step back through the previous recording or editing operations, so that
you have plenty of opportunity to fix any mistakes that happen!
Time Stretching:
Match tempo between recordings of different tempo, or fit recording into a specific time length!
Reverse playback:
Reverse specific regions of audio data using single or multiple tracks, then copy the results to new audio
regions or tracks!
11
Advertisement
Table of Contents
