Table of Contents
Advertisement
4. Press the PlayTrack radio button, then press OK (You'll be applying an insert effect to a playback track).
5. Press the Popup Button just above the InsEff2 tab in the display:
6. Press to highlight the Off value - to the left of the 1 box (insert effect 1).
7. Rotate the DIAL clockwise, until you set the insert effect assign channel to a value of 3.
8. Press the OK button in the display.
Note: If the song ends before you've finished this part of the tour, just press the IN/LOC1 key - the song will
locate to it's beginning and start playback again!
9. Press the InsEff1 tab at the bottom of the display.
10. Make sure that all tracks except tracks 1-3 are muted (TRACK STATUS keys unlit)- this way you'll be
able to clearly-hear the insert effect you're going to apply.
11. Rotate the DIAL to select insert effect I069 MM1: P4EQ-Exciter (parametric equalizer and exciter).
12. Press the MM1: P4EQ-Exciter button in the display - you'll see two icons representing these effects.
13. Press the P4EQ icon to view the parameters for this effect. Try adjusting other parameters on this page,
like Fc (frequency), "Q" and G (gain) settings.
Note: After you've tried working with the above insert effect, make sure to
tutorial!
un-mute
15
KORG D16 Guide
all tracks to continue this
Advertisement
Table of Contents
