Working With The Master Effects - Korg D16 Manual

Digital recording studio

Hide thumbs Also See for D16:

Table of Contents

KORG D16 Guide

Working with the Master Effects

Two Master Effect processors can be used simultaneously, with individual send levels

for each channel! - Used mainly for ambient processing of the overall mix - 32 Preset

programs plus 32 user programs available!

You'll use the currently selected song

View the current Master Effects and Send Levels:

1. Press the MASTER EFFECT / AUX key, then press the MstEff1 tab in the display - note that Master

Effect M009 RV4: BrightPlate has already been assigned - also note the RetLev (return level) and

RetBal (return balance) "knobs" and the current settings in the display.

2. Press the EffSnd1 tab in the display, and view the channel send levels ("knobs") to this effect.

3. Press the MstEff2 tab in the display (M021 DL6:AutoPanDelay), then press the EffSnd2 tab to view the

send levels to this effect.

Enable Scene Memory and disable Loop Playback:

1. Press the SCENE key, then press to highlight the SceneRead:Off button in the display - to enable

Scene Memory.

2. Press the LOOP key, then press to highlight to Loop:On button in the display - to disable Loop

Playback.

Enable Channel Pairing to control effect send levels:

1. Press the Channel Pairing (heart) icon in the upper-right of the display, then press Send.

2. Press the 1

2 button in the display, then press the OK button to set Channel Pairing for the Track 1 and

2 send levels. Adjusting Track 1's send level in the following steps will simultaneously-control the send

level for Track 2.

"Alone"

for the following exercise...

Table of Contents