Korg D16 Manual page 54

KORG D16 Guide
Check out this song's Final Effect:
1. Press and hold the STOP key, then press the REW key once, to reset the song to the beginning.
2. Press the PLAY key to playback the song.
3. Press the MASTER EFFECT / AUX key, then press the FinalEff tab in the display. Note that F012
LS2:St.MBLimiter has been assigned as the Final Effect for this song.
4. Press to highlight F012 in the display, and slowly-rotate the DIAL to select and try some more of the
Final Effects available.
5. Press the selected effect name program button in the display, then press the effect icon (s), and work
with the effect parameters. When you're satisfied with the results, press the OK button in the display, and
then press the Store button and rotate the DIAL to select one of the User Effect programs.
6. Press the OK button to write your new Final Effect into memory.
Tip: You can use the Bypass button in the display to "toggle" between the original settings and your edits,
when working with the Insert, Master and Final Effects.
Note: The factory User Effect programs for Insert, Master and Final effects are duplicates of the Preset
Effect programs, so don't worry if you write over any User Programs - you can recall the original Presets at
any time!
Tip:Use the Rename button in the display to name your newly-edited Insert, Master and Final Effects.
Note: Please be aware that any custom effect programming or new song data could be lost when new data
is loaded into the D16. Use the backup / copy procedures to save your User effects and song data to
external drives (see page 43 in the D16 owner's manual)
54