Working With The Metronome And Rhythm Patterns - Korg D16 Manual

Digital recording studio

Hide thumbs Also See for D16:

Table of Contents

KORG D16 Guide

4. As the song plays, press the track button 1, then press the SoloToMstOut button to solo the Drum L.

5. Try pressing other track buttons to create solo "groups", or press highlighted track buttons to turn solo

off for the desired tracks.

Note: If the D16 you're working with is connected to audio monitors via the MASTER outputs, the solo

function will not work until you press the Solo To Master Out button in the lower-right of the display, after

selecting a track to solo.

6. When you're finished trying the Solo function, press the Clear All button in the upper-right of the display,

then press the STOP key.

Work with the Metronome and Rhythm Patterns:

For the following section, we'll have you select a NEW SONG:

1. Press the SONG key, then press the SelSong tab in the display.

2. Press the New button in the lower right of the display. From the MakeNewSong dialog box, press OK.

The next - available empty song location will be selected.

3. Press the TEMPO / RHYTHM key - you'll hear a standard metronome "click".

Now to audition some PCM rhythm patterns:

4. Press the Metro4 button in the display.

5. Slowly rotate the DIAL to select and listen to some of the great rhythm patterns available. Use the

MASTER fader to control the overall volume level.

6. After you're finished auditioning patterns, press the SONG key to stop pattern playback.

Table of Contents