Working With The Scrub Function; Working With The Solo Function - Korg D16 Manual

Work with the SCRUB function:
1. If you've been editing effects previous to this point in the tour, make sure to exit the effect parameter
pages by pressing OK in the display, then press the SONG key to return to the main page - Song I001:
Alone.
2. Make sure that the TRACK STATUS LED's are all lit green!
3. Press the SCRUB key.
4. Press the > button to the left of Trk1 in the display, and press to select the Trk6 (Guitar) radio button
from the dialog box, then press OK.
5. Rotate the DIAL - you'll see the track waveform data as you scroll through measures with the DIAL,
and you'll hear the audio data for this track - at a pitch governed by how fast you scrub with the DIAL.
6. Press the button in the lower - left of the display to zoom - in on the waveform data, then continue to
scrub the audio.
Playback the audio data at half-speed:
1. Press the FF key while the SCRUB function is on.
The audio data will play back at half-speed of the original pitch - a great way to rehearse
and learn intricate solo lines, etc.!
2. Press the STOP key to stop song playback, then press OK in the display.
Work with the Solo function:
1. Press the SONG key to return to the main song menu. Make sure you're still working with Song I001:
Alone.
2. Press the PLAY key to start playback of the song.
3. Press the SOLO / MONITOR key, then press the Solo tab in the display:
19
KORG D16 Guide