Table of Contents
Advertisement
KORG D16 Guide
A better understanding of the D16 Insert Effect Routing...
There are four configurations available in the Select Effect Type menu:
-
1in2outx2:
Primarily Guitar and Bass Chains of 3-5 effects each - For Insert Effect assignment
as you record ONLY - good for mono-in / stereo-out sources
2in2outx2:
Great for keyboards and stereo-in / stereo-out instruments
-
1in1outx4:
The default setting, and the one you'll use in the following exercise. Good to use for
-
fixed panning sources like rhythm guitar - selecting this configuration lets you select from four
mono Insert Effects to be used in the song.
1in1outx8:
The largest configuration of multiple effect choices - use this one when you need up
-
to eight mono effects in a song - ideal for fixed pan sources that need effect isolation - like
drums.
Although you
won't
be changing the Effect Type configuration right now, its good to know when
and where to apply the four types. 1in1outx4 is the default setup in a new song, as indicated in
the display...
Set the Insert Effect Assign Channel:
1. Press the Popup button just below the Insert To: Edit Field in the display (see the previous graphic).
2. Press to highlight the Off value to the left of 1 in the display, then slowly-rotate the DIAL until the display
indicates 6 (see graphic below).
3. Press the OK button in the display. You've just assigned Insert Effect 1 to Channel 6.
50
Advertisement
Table of Contents
