Analog Inputs; Virtual Tracks / Bounce Functions - Korg D16 Manual

Digital recording studio
Hide thumbs Also See for D16:
Table of Contents

Advertisement

KORG D16 Guide
Overview the Analog INPUTS:
PITCH: The D16 features 8 TRS-balanced audio inputs, each with TRIM control, located on the
front and back panel. Two of these inputs are XLR/Phono 3-31 type connectors. And with the dedicated
GUITAR input on the front panel, you can quickly - connect your guitar and begin recording!
1. Press the INPUT key. Here you can set front and rear panel inputs to specific channels, and apply EQ on
input for tracks 1-16.
PITCH: The D16's digital mixing environment makes it easy for you to route external sources to any
channel - instantly!
Overview the VIRTUAL TRACKS / BOUNCE functions:
PITCH: The D16 has 16 tracks, each with 8 Virtual tracks - giving you 128 onboard tracks!
1. Press the TRACK key. The Vtr1-8 and Vtr9-16 tabs, track select and DIAL let you specify the virtual
tracks for recording.
PITCH: You can record solo parts etc. on the virtual tracks and then select your favorite take later!
PITCH: Bouncing tracks has never been easier! In addition to traditional track bouncing functions, the D16
features an exclusive "16 to 2" function that let's you bounce 16 tracks of audio data down to 2 virtual
tracks - this way you can create virtual mixdowns internally, and select your favorite mix from the virtual
tracks - then master to external 2- track machines when you've got the perfect "virtual" mix!
Note: If the song ends before you've finished this part of the tour, just press the IN/LOC1 key - the song will
locate to it's beginning and start playback again!
10

Advertisement

Table of Contents
loading

Table of Contents