Konica Minolta 9750 Manual page 8

1 Display Panel: Refer to this display for instruc-
tions and information while your Konica Fax is
performing operations or while you are entering
information or changing settings.
2 Copy key: After loading a document, press this
key to make a copy. When no documents are
loaded, press this key once to display a Message
Confirmation Report about your last transmission
on the LCD Display Panel, and a second time to
receive a printed report. You can also use the
Copy key to program a manually entered fax
number into a One Touch key or Auto Dial
number—see page 38 for details.
When programming One Touch keys
3 Hyphen key:
and Auto Dial telephone numbers, use this key to
tell your Konica Fax to pause briefly before it dials
the rest of the telephone number.
4 Search key: The One Touch keys and Auto Dial
numbers can be programmed to have a name or
location ID associated with their telephone num-
bers. Using this key by itself or in combination
with the numeric keypad, you can search for these
numbers alphabetically. You can also use the
Search key to search for unassigned One Touch
keys and Auto Dial numbers.
Use this key to switch your
5 Auto Rec key:
machine's answering mode. The answering mode
controls how your fax machine answers incoming
calls and receives faxes. The display will always
indicate your current selection. See "Setting the
Answering Mode," page 22, for more information
about the answering modes available.
6 Select Function key:
machine's advanced transmission and reception
functions, to obtain reports and to star t program-
ming functions. To select a function, press the
Select Function key, then press the One Touch
key labeled with the function you want to use.
While programming or selecting other functions,
pressing the Select Function key a second time
takes you directly back to your fax machine's
standby mode.
7 Auto Dial key: Auto Dial numbers are abbreviated
numbers for rapid dialing. Rather than dialing the
entire telephone number, you can enter a 2-digit
Auto Dial number instead. You can also use the
Location IDs (names) associated with Auto Dial
numbers to search for these locations by name
using the Search key.
8 Redial key: Press this key to manually redial the
last number dialed.
Use this key to activate your