Table of Contents
Advertisement
7
Close the copy stacker and push down until you hear
the copy stacker click into place. Besure that the
cover latches on both sides.
8
Close the document table.
9. Follow the instructions in the next section to reset the
drum counter.
Important: Reset the drum counter only when you have
finished installing a new image drum. You can only reset
the counter when the "Change Drum Soon" message is
on the display.
1
Wait until the time, date and answering mode appear on the
display. Then press the Select Function key.
2
Press the 7/Counter Display One Touch key. The
display shows DRUM COUNT.
3
Press the Yes
key to clear the image drum unit
counter.
4
Press the Select Function key to finish.
This section lists the status and error messages that
may appear on the machine's display panel, and
explains what they mean and how to correct any
problem they indicate.
Note: The red Alarm indicator lights when there is an
error condition.
02:13 [FAX]
Under normal operating conditions, the top line of the
display shows the time and the answering mode—FAX,
TEL, PC, T/F, MEM, FWD, or TAD.
Advertisement
Table of Contents
