Konica Minolta 9750 Manual page 18

1 Using the supplied screw, connect the handset cradle
to its base.
2 Position the handset cradle on the left side of the
Konica Fax.
3 Plug one end of the handset cord into the handset
and the other end into the jack on the front of the
cradle. Place the handset in the cradle.
4 Insert the supplied telephone cord into the jack
located on the back of the cradle.
5 Feed the telephone cord from the back of the cradle
through the cable run located on the back of the
Konica FAX 9750.
Feed cable here