Table of Contents
Advertisement
Copying
You can use your Koica fax as a stand-alone copier
to make up to 99 copies of a document at one time.
The default resolution for copies is FINE; you can
also use the Yes
key to change to a finer
resolution before you press the Copy key.
Document Type
Resolution
to Use
Normal office
STD (Standard)
documents
Documents with small
FINE or EX. FINE
type or other fine details
Documents with photos
PHOTO
or many shades of gray
To make copies:
1
Adjust the document guides to the width of the paper
you are using.
2
Resolution
of Scan
100 X 200 dpi
FINE: 200 X 200 dpi
EX.FINE: 200 X 400 dpi
200 X 200 dpi
3
4
5
Neatly stack your documents, then inser t them
face down into the document feeder. Readjust the
document guides for a snug fit. Your machine will
grip the documents, and pull the bottom page into
the machine.
Press the Copy key. The display shows PRG. NO.
OF COPIES, [1SETS]. If you want to make just
one copy, you are finished. Your machine will
pause briefly, then begin copying.
To make multiple copies, enter the number of
copies you want to make on the numeric keypad.
Then press the Copy key again. Your machine
begins making copies.
To stop the copying process, press the Stop key.
Advertisement
Table of Contents
