Konica Minolta 9750 Manual page 25

Your Konica FAX 9750 comes with two languages installed--
English and Spanish, French or Portuguese, depending on
where you bought your unit—which appear on the display
and in reports. Follow the instructions below to switch lan-
guages.
1 Press the Select Function key.
2 Press the 9/User Program One Touch key. The
display shows 1:FUNC. PROGRAMMING.
3 Press the Yes key. The display shows
FUNCTION NO. [ ]
ENTER 01-23.
4 Using the numeric keypad, enter 15. The display
shows USER LANGUAGE.
5 Press the No key to switch to the other
installed language.
6 To accept the language change, press the Yes
7 Press the Select Function key to finish.
For Konica FAX 9750 only. When your Konica FAX
9750's answering mode is set to Fax Forwarding
[FWD], it receives fax messages into memory and
then automatically resends it to another location—
a useful feature if you are travelling. You must
program a forwarding number before you can set
the 9750 to Fax Forwarding mode.
1 Press the Select Function key.
2 Press the 9/User Program One Touch key. The
display shows 1:FUNC. PROGRAMMING.
3 Using the numeric keypad, press 6. The display
shows 6:FORWARDING NO. PRG.
4 Press the Yes
=NO=<FORWARDING NO.>.
5 After the display clears, enter the fax number you
want your messages forwarded to.
To Do This
Enter numbers
Enter spaces
key. Enter hyphens
Enter pauses (i.e., to wait
for long distance or
outside lines
Move the cursor to
make corrections.
6 Press the Start key to save your entry.
7 Press the Select Function key to finish.
key. the display shows
Use
Numeric keypad (press once)
Space One Touch key
Hyphen key
Pause key
Yes and No keys.