of a team working in separate locations.
You can program up to 10 groups into your Konica
FAX 9750.
The Konica FAX 9750 can have up to 79 locations
per group.
Note: This is different from relay broadcasting, where
one fax is sent to a remote machine, which then relays
it to a group of fax numbers.
1
Press the Select Function key.
2
Press the 8/Location Program One Touch key. The
display shows LOCATION PROGRAMMING.
3
On the numeric keypad, press the # key. The
display shows GROUP SETTING.
4
Using the numeric keypad, enter the two-digit
group number you want to program.
Model
Group Numbers Avialable
Konica FAX 9750
01–10
5
The display shows the number of your current
group and SELECT LOC.(S).
6
You can now add a location to your group (or delete
a location from it). Refer to the instructions below.
To Do This
Use
Add a One Touch
Press the One Touch key.
location
Press Yes 3 to add it to the group.
Add an Auto Dial
Press Auto Dial. Enter the 2-digit Auto location
Dial number. Press Yes
Delete a previously
Press the One Touch key. Press No
added One Touch
to delete it from the group.
location
Delete an Auto Dial
Press the Auto Dial key. Enter the 2-digit location
Auto Dial number. Press No
it from the group.
Search for a location
Press the Search key continuously until
by name to add or delete
the location you want appears. Press Yes
to add it to the group. Press No
7
After you have completed your selection by pressing
Yes
or No
, the display shows SELECT LOC.
again. Continue to add or delete locations from your
group. Each group can contain up to a maximum of
all of the One Touch and Auto Dial locations available
on your Konica FAX 9750.
8
When you are finished programming your group,
press the No
key. The display shows LOCATION
PROGRAMMING.
9
To program another group, go back to Step 3.
If you are finished, press the Select Function key.
to add it to the group.
to delete
to delete it.