Reduce; Shift - Konica Minolta KM-7145 Instruction Manual

Repeating Automatically or Selecting Repeating Times (Repeat:
1.
Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch Repeat on the Application Selection Screen.
The Repeat Mode Selection Screen will be displayed.
3.
Touch AUTO, RepeatX2, RepeatX4, or RepeatX8, as desired.
Touch OK to return to the Repeat Mode Selection Screen.
4.
Touch OK.
The Application Selection Screen will be restored.
Non-Image Area Erase is automatically selected on the Application
Selection Screen when AUTO mode is selected.
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
AUTO/ Repeat Mode) (continued)
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
Reduce &

Shift

Stamp
Overlay
9-35