Finisher Adjustment - Konica Minolta KM-7145 Instruction Manual

[19] Finisher Adjustment

If optional FS-114 Finisher mounted with SK-114 Saddle kit / PK-114 Punch kit is
installed in your machine, use this mode to make fine adjustments to each function of
the finisher.
System/Copier Setting Menu Screen
Fold&Stitch Position Adjustment Screen
Punch Position Adjustment Screen
Adjustment Confirmation Screen (Basic Screen)
Procedure
1 Touch 19. FNS adj. to display the Finisher Adjustment Menu Screen.
2 Touch the desired menu key to display the adjustment screen for each function.
3 Specify the paper size.
Touch upper/lower arrow key to display the desired paper size in the message area.
NOTE:
This paper size setting is not required on the Punch Position Adjustment
Screen.
4 Specify the adjustment value.
Touch +/- to select "+" or "-" as desired, then enter the value using the screen keypad.
Check the entered value and previous value displayed in the upper-left side area.
Finisher Adjustment Menu Screen
Fold Position Adjustment Screen
Punch Loop Adjustment Screen
Key Operator
Mode
System Initial
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-55