Making Sample Copy (Proof Copy) - Konica Minolta KM-7145 Instruction Manual

Making Sample Copy (Proof Copy)

Use Proof copy to produce a sample of the copied set before making multiple copies.
This is a convenient and cost effective way of viewing the results of the following
copying selections.
• Copying conditions using Store mode
• Sheet/Cover insertion
• Chapter
• Combination
Specifications for Proof Copy
❒ Proof copy is available when using RADF or Platen store mode for multiple
originals.
❒ Proof copy is not compatible with Group or E-SORT+Group output mode.
1.
Select the desired copy conditions and enter the desired print
quantity.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Position original(s).
See p. 3-2 to p. 3-6 for details on positioning originals.
3.
Press [PROOF COPY] on the control panel.
A sample copy will be output, and the Check Screen will be displayed.
• Press [STOP] to suspend the proof copying. In this case, the scanned
• You can change selections with an asterisk (
4-2
image data will not be deleted from memory.
after proof copying.
• Booklet
• Image insert
• Dual Page
*
) displayed on the left side