Checking Feature Selections / Proof Copying (Check Mode) - Konica Minolta KM-7145 Instruction Manual

Checking Feature Selections / Proof Copying
(Check Mode)
Use the Check mode to confirm copying selections before starting print operation.
In this mode, also use Proof copy to produce a sample of the copied set before making
multiple copies.
Specifications for Check Mode and Proof Copy
❒ Proof copy is available when using RADF or Platen store mode for multiple
originals.
❒ Proof copy is not compatible with Group or E-SORT+Group output mode.
1.
Select the desired copy conditions and enter the desired print
quantity.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Position original(s).
See p. 3-2 to p. 3-6 for details on positioning originals.
3.
Press [CHECK] on the control panel.
The Check Screen will be displayed.
Verify the settings made for the current job.
• If settings are OK, proceed to step 8.
• If a sample copy is needed, proceed to the next step.
4.
If any setting change is required before proofcopying, touch EXIT to
return to the Basic Screen, then change settings, as required.
4-4