Non-Image Erase - Konica Minolta KM-7145 Instruction Manual

[6] Non-Image Erase

Select the mode of Non-Image Area Erase function to be in effect when this feature is
selected on the Application Selection Screen after power is turned on or after Auto
Reset occurs.
❒ Setting options: AUTO, Oblique erase, Rectangular erase; Original density Auto/Manual
❒ Default setting: ERASE MODE AUTO; ORIGINAL DENSITY AUTO
System/Copier Setting Menu Screen
Procedure
1 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen, then touch 6.
Non-image Erase to display the Non-Image Erase Initial Setting Screen.
2 Select the desired erase mode and original density level.
Touch AUTO to let the machine select the erase mode and density level automatically.
To specify the erase mode manually, touch Oblique erase or Rectangular erase, as
desired, then select the density level required. Five exposure levels are provided.
NOTE:
Select AUTO mode if the specified Oblique erase or Rectangle erase mode
does not function properly due to the type of set original.
3 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen. If
other copier initial setting changes are required, touch the desired key.
4 Touch RETURN to restore the System/Copier Setting Menu Screen.
5 If no further changes are required, turn the machine power OFF then ON for normal
copying operations.
13-14
[2] Copier Initial (continued)
Copier Initial Setting Screen
Non-Image Erase Initial Setting Screen