Copying Using Memory; To Scan Originals Into Memory (Store Mode) - Konica Minolta KM-7145 Instruction Manual

Copying Using Memory

This section describes various copying features available on this machine using its
built-in memory.

To Scan Originals into Memory (Store Mode)

Store mode allows you to scan all the originals first, then to start a continuous printing
job.
Use RADF store mode to scan a large amount of originals.
Use Platen store mode for originals that cannot be fed through the document feeder
due to thickness, size or condition.
RADF tray capacity is 50; however, more than 50 originals can be scanned
into memory using RADF store mode.
Specification for Store Mode
❒ Incompatible with RADF store mode: Image Insert, Dual Page
❒ Incompatible with Platen store mode: None
1.
Make copying selections, as desired.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch STORE on the Basic Screen to highlight it.
You may find the key already highlighted due to the copying selections made.
3.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
3-26