When "Call For Service" Message Is Displayed - Konica Minolta KM-7145 Instruction Manual

When "Call for Service" Message Is Displayed

A "Call for Service" message indicates a machine condition that requires the attention
of your service representative.
The Call for Service Screen usually displays the telephone and facsimile numbers of
your service representative.
When the Call for Service Screen is displayed, be sure to contact
your ser vice representati ve i mmedi at ely by fol lowing the
procedure below.
1.
Make note of the Report code No. indicated in the second line of the
message area.
If your machine uses the Remote Diagnostics option and is automatically
monitored by your service representative, the Key Operator can call for
service using the Key Operator setting. See p. 13-50.
After calling for service using the Key Operator setting, be sure to turn OFF
the power switch and main power switch immediately, then unplug the
machine.
2.
Turn OFF the power switch and main power switch.
3.
Unplug the machine.
4.
Contact your service representative and report the condition and
code No.
5-2