Installing The Optional Button Cover - IBM 4820 Planning, Installation And Service Manual

Installing the optional button cover

Installing the optional button cover
A
Figure 2-44. Location of optional button cover
Note: Because the button cover is somewhat difficult to remove, ensure that you
To install the optional button cover, follow these steps:
1. Align the button cover with the buttons located on the bottom of the 4820 ( A
2. Press and snap button cover in place.
3. See "Tailoring your installation" on page 2-1 to complete your installation.
2-46
4820 Planning, Installation and Service Guide
have performed an auto adjust before completing this step.
in Figure 2-44).
January 14, 2005