Attaching The Filler Panel Covers - IBM 4820 Planning, Installation And Service Manual

Integrated touch pedestal instructions
Figure 2-26. Attaching the filler panel covers
8. As shown in Figure 2-26, place the filler panel covers on the arm assembly.
SurePOS 720, 740, or 780 with integration tray: Follow these steps when
installing the integrated touch pedestal onto a SurePOS 720, 740, or 780 with an
integration tray:
1. Remove the rubber plugs in the top cover of the system unit (if not already
2. Route the cables as described for your 4820 model.
2-22
4820 Planning, Installation and Service Guide
removed).
a. See the SurePOS 720, 740, and 780 Hardware Service Guide to remove the
integration tray and top cover.
b. From the inside of the top cover, push the rubber plugs out of the plastic.
c. Reinstall the top cover and the integration tray.
January 14, 2005