1. TILT SWIVEL REMOVAL
(1) Remove the Cover Hinge.
(2) Remove two screws (a).
(3) Remove the Cover Piece Back.
(4) Remove two connectors (c).
(5) Remove the Module Link Cable connector.
(6) Remove the screw (b).
(7) Remove the Tilt Swivel.
2. BACK COVER REMOVAL
(1) Remove four Screw Covers (a).
(2) Remove four screws (b).
(3) Remove the Back Cover Ass'y.
(a)
(a)
DISASSEMBLY
Cover Piece Back
Module Link Cabel
3. CABINET ASS'Y REMOVAL
(a)
(b)
Back Cover
(a)
(b)
(b)
(b)
- 9 -
Cover Hinge
(b)
(c)
(a)
(a)
(1) Remove four Screws (a).
(2) Remove the Control PCB connerctor.
(3) Remove the Cabinet Ass'y.
Cabinet
(a)
(a)
Control PCB Connector
(a)
(a)