Pedestal (Free-Standing) Parts List - IBM 4820 Planning, Installation And Service Manual

Free-standing pedestal instructions
Free-standing pedestal
Follow these instructions for installing the 4820 SurePoint Solution to the
free-standing pedestal:
Attaching the free-standing pedestal to the counter
Note: Attaching the free-standing pedestal to the counter is optional. Your pedestal
Follow these steps to mount the 4820 SurePoint Solution to your counter.
1. Using the template (see Figure B-2 on page B-2) as a guide, mark the screw
2. Place the pedestal so that the mounting bolts align with the counter screw
3. Use the enclosed M6 screws to secure the pedestal to the counter. The slots
4. See "Tailoring your installation" on page 2-1 and continue with your
Mounting the 4820 to the free-standing pedestal
Review the parts diagram in Figure 2-18, and then follow the steps to attach the
4820 SurePoint Solution to the free-standing pedestal:
Figure 2-18. Pedestal (free-standing) parts list
1. If attaching the free-standing pedestal to the counter, ensure that the pedestal is
2-14
4820 Planning, Installation and Service Guide
may not require mounting.
hole locations for drilling through the counter. Use 8-mm bit (5/16-in.) bit to
drill the four screw holes.
holes.
located in the metal support bracket allow you to position the pedestal for
maximum stability.
installation.
secure.
January 14, 2005
Mounting bracket cover
Cable cover
Screws
Mounting bracket
Free-standing base