Notices References in this publication to IBM products, programs, or services do not imply that IBM intends to make these available in all countries in which IBM operates. Any reference to an IBM product, program or service is not intended to state or imply that only IBM's product, program, or service may be used.
Setup Important:Before connecting the monitor, turn off the computer and attached devices. Also ensure the power at the electrical outlet matches the power requirements of the monitor. Refer to the Specifications section on page 16 for more details. Attaching the Stand 1.
Connecting your monitor 1. Connect the signal cable to the video port on the back of your computer (figure A). Your computer may have a video adapter card installed. In this case, attach the signal cable to the connector on the video adapter card (figure B).
Workplace preparation Working Practices Positioning the monitor Rest Choose a suitable place to position the monitor where Take regular breaks. Vary your posture, and stand up it is not near fluorescent desk lighting or any and stretch occasionally as prolonged use of computer equipment that produces magnetic fields that could workstations can be tiring.
User controls The image is already optimized for many display modes. However, the controls can be used to adjust the image to your liking. c t i t i n . f f v t i o i t g i l o i t o i t .
Contrast and Brightness Contrast and Brightness can be adjusted as follows, without the need to display the OSD. Select function and use " " " " control to adjust: If adjustment is not made within 15 seconds, the current setup will be saved and the control screen will disappear automatically.
On-Screen Display Activating the On-Screen Display The monitor controls are accessed by pressing button to enable OSD (On-Screen Display). The main menu will be displayed as follows. MAIN MENU BRIGHTNESS Each Sub-Menu icon is selected by highlighting it via the " "...
Further information Display modes The display mode the monitor uses is controlled by i l i the computer. Therefore you should refer to your computer documentation for details on how to change display modes. The image size, position and shape may change when the display mode changes.
As an ENERGY STAR (R) Partner, IBM has determined that this product meets the ENERGY STAR guidelines for energy efficiency. IBM recommends that you switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.
If you have a problem setting up or using your monitor, you may be able to solve it yourself. Before calling your retailer or IBM you should try the suggested actions that are appropriate to your problem. o t i t e l S "...
t i n a l f o i t . l a r i f t i n g i f F " i l f n i t t n i h t i f n i o i t "...
t i n c i t t n i l e i o t i t i n o i t i t e o i t t i n t i n i t e o i t o i t t l i...
If you are unable to correct the problem yourself, you may seek further help as follows: 1. Type, model and serial number from the label on the back of your monitor. Call IBM HELPCENTER. 2. Purchase receipt. In the US call 1-800-722-2227 3. Description of problem.