Routing The Cables; Path Of Pointing Device Cable - IBM 4820 Planning, Installation And Service Manual

Routing the cables

January 14, 2005
Routing the cables
For an efficient and uncomplicated install, IBM recommends that you route the
cables in the following order:
1. Video
2. Power
3. Audio cables
4. Touch/keypad/MSR cable
5. Pointing device (with attached cable)
Routing the pointing device cable (integrated and distributed)
Note: Route the pointing device cable before attaching the 4820 display to the
mounting bracket.
Figure 2-38. Path of pointing device cable
1. See Figure 2-38 and route the pointing device cable through the middle opening
of the mounting bracket and into the trough, down through the pedestal.
2. Attach the cable to the mouse port of the 4694.
2-33
Chapter 2. Installing the IBM 4820