Video Cable Routing Direction - IBM 4820 Planning, Installation And Service Manual

January 14, 2005
2. Place the pedestal so that the mounting bolts align with the counter screw
3. Use the enclosed M6 screws to secure the pedestal to the counter as shown in
Routing the cables for the distributed pedestal
1. Remove the trough cover from the distributed pedestal.
Figure 2-13. Video cable routing direction
2. As shown Figure 2-13, route the video cable down through the distributed
holes.
Figure 2-12 on page 2-8. The slots located in the metal support bracket allow
you to position the pedestal for maximum stability.
pedestal and leave it unconnected.
Distributed pedestal instructions
Chapter 2. Installing the IBM 4820
2-9