IBM 4820 Planning, Installation And Service Manual page 55

January 14, 2005
3. Attach the keypad cable to the MSR/keypad connector.
Figure 2-34. Rear view of attached keypad
4. Install the replacement connector cover that shipped with the keypad.
5. Continue with the installation of your next option.
v All other models: Align the MSR/keypad with the edge ( 1 ) of the 4820 so
that the top edge of the 4820 aligns with the top of the keypad. Slide the
keypad unit downward ( 2 ) until it snaps into place.
Installing the options
Chapter 2. Installing the IBM 4820
2-29