Identifying Parts And Controls - IBM E74 Operating Instructions Manual

US-2
IDENTIFYING PARTS AND
CONTROLS
See the pages in parentheses for further detail.
Front
a b c
a. Displays menu & exits menu
b. Scrolls through menu to choose an icon for
adjustment /
Adjusts level of selected icon
c. Confirms menu selection
d. Power LED
e. Power ON/OFF switch
Rear
f. AC input connector
This connector provides AC power to the
monitor.
g. Video input cable
Inputs RGB video signals (0.700 Vp-p,
positive) and sync signals.
d e
Pin Function
1 Red signal
2 Green signal
3 Blue signal
4 Ground
NC
5
(*NOTE)
6 Red return
7 Green return
8 Blue return
*NOTE:
g
f
1 5
15
Pin Function
9 +5V (from computer)
10 Digital ground
11 Ground
12 SDA (DDC2B)
Horizontal
13
Synchronization
Vertical synchronization
14
& VCLK
15 SCL (DDC 2B)
This pin is used for self test detection; at
side, this pin has to be connected
MONITOR
to ground.