Saving, Loading And Resetting Coefficients - Dalsa 4M30 User Manual

Falcon 4M Camera Manual
Calibrating Individual Pixels
Purpose:
Syntax
Syntax Elements:
Notes:
Example:

3.7.6 Saving, Loading and Resetting Coefficients

Saving the Current PRNU Coefficients
Purpose:
Syntax:
Notes:
Example:
Saving the Current FPN Coefficients
Purpose:
Syntax:
Notes:
Example:
DALSA
Sets an individual pixel's PRNU coefficient.
spc x y i
x
The pixel column number from 1 to 2352.
y
The pixel row number from 1 to 1728.
i
Coefficient value in a range from 0 to 12287 where
PRNU multiplier = 1 + (
The command is not available when the camera is using
spc
the factory calibrated coefficients (
the user coefficient set (
PRNU calibration. An error message is returned if you attempt
to perform PRNU calibration when using
the current number, send the command
csn
spc 10 50 500
Saves the current PRNU coefficients to non-volatile memory.
wpc
The wpc command is not available when the camera is using the
factory calibrated coefficients (csn 0-7). You must select the
user coefficient set (csn 8-15) before you can perform PRNU
calibration. An error message is returned if you attempt to
perform PRNU calibration when using csn 0-7. To return the
current number, send the command
csn
wpc
Saves the current FPN coefficients to non-volatile memory.
wfc
The wfc command is not available when the camera is using the
factory calibrated coefficients (csn 0-7). You must select the
user coefficient set (csn 8-15) before you can save FPN
coefficients. An error message is returned if you attempt to save
FPN coefficients when using csn 0-7. To return the current
number, send the command
csn
wfc
i
)
4096
). You must select
csn 0-7
) before you can perform
csn 8-15
csn 0-7
get csn
get csn
.
get csn
49
. To return
.
.
03-032-20044-01