Download Print this page

GE GBS2OKB Owner's Manual And Installation Instructions page 53

Icemaker accessory kit

Advertisement

Installation Instructions
[] POWER CORD ADAPTER
There are two power cord adapters
included with the
kit; be sure to use the one that matches
the socket on
the rear wall of the refrigerator.
Plug the female end
of the power cord adapter
(19 or 20) onto the male
terminals on the icemaker
power cord. When
connecting
the adapter
to the power cord, be sure the
seal is in place between
the connectors.
Secure the
power cord adapter
to the icemaker
by putting it into
the hook at the back of the icemaker
and attaching
it
to the ieemaker
with a wire lle (22).
6-pinAdapt_r
[] INSTALL THE ICEMAKER
FILL CUP
Install the icemaker f'dl cup (side-mounted)
(18) into
the icemaker
as shown.
[]PLUG
IN THE ICEMAKER
Holding
the icemaker
in place, insert the icemaker
power cord plug (D) into the socket on the rear wall,
making
sure the prongs mad holes are matched.
Press the plug firmly into the socket. On f-pin cord
adapter
(20), lock the plug in place by clipping
the
restraints
onto each side of the plug. Make sure the
restraints
click into place.
.
[] MOUNT THE ICEMAKER
• Lift the icemaker
so the fill tube (16) fits in the
fill cup opening
(E). Hang
the icemaker
on the
two mounting
screws (C).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube (16) extends
into the fill cup
opening
on the back of the icemaker.
(Check
the rear of the refrigerator
to make sure the fill
tube has not been pushed
out of the back of the
refrigerator).
THEN SECURELY TIGHTEN
THE ICEMAKER
MOUNTING
SCREWS.
[] INSTALL THE ICE BUCKET
Install the freezer shelf in the lowest position.
Place
the ice bucket
(11 ) on the shelf under
the icemaker.
Make sure the icemaker
power switch is set to O (off).
I_ATI'ACH
WARRANTY
LABEL
A label (9) is provided
with this kit to record
the
date of installation
for warranty
purposes.
Apply it
to the back of the refrigerator.
[]
KEEP THIS MANUAL
The warranty for the icemaker is printed
in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker
installation
inside the freezer
is now
complete.
Continue
to the Water Valve Assembly
section.
47

Advertisement

loading