Advertisement
Installation Instructions
WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS
[]
Are these the right instructions
for your model? Follow the Installation Instructions
indicated by
the label on the back of the refrigerator--
[] [] [] [] [] [] [] [] [] [] [] [] or []
BEFORE YOU BEGIN
Read each step thoroughly
before proceeding.
CAUTION
-
Unplug
the
Refrigerator.
To eliminate
the danger
_'j_ [_,_
of electric
shock during installation,
"_
_
you must unplug
the refrigerator
from
its electrical
oudet.
TOOLS YOU WILL NEED
FlatbladeandPhillips
screwdrivers
1/4" Nutdriver
Pliers
Sharpknife
5/16" Socketaradjustable wrench
[_REMOVE THE ACCESS COVER
Remove
the rear access cover. This requires
removing
six screws which
attach the cover to the
back of the refrigerator
case. Use a 5/16"
socket or
an adjustable
wrench.
Be sure to save the screws as
the access cover must be reinstalled
later to ensure
your refrigerator
will function
properly.
[] ATTACH THE WATER VALVE
• Locate
the female connector
plug (A).
• Plug the female connector
(A) onto the male
terminals on the water valve (4). Either wire
can go on either terminal.
• Fasten the water valve to the cabinet
by driving
the hex-head
screw (13).
DO NOT DRILL ANYADDITIONAL
HOLES
NOTE:
There
may be some internal
refrigerant
tubing
that will need to be moved
slightly in
order
to provide
enough
room to install the
water valve.
• Check
the plastic water line nut on the bottom
of the water valve to be sure it is hand
tight.
DO NOT
USE TOOLS.
28
Advertisement
