Advertisement
Installation Instructions
WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS
[]
Are these
the right instructions
for your
model?
Follow
the Installation
Instructions
indicated
by
the label
on the back of the refrigerator--
[]
[] []
[]
[]
[] []
[]
[] []
[]
[] or []
BEFORE YOU BEGIN
Read each step thoroughly
before proceeding.
" _UTION-
Unplug the
_
Refrigerator.
To eliminate
the danger
I_
of electric
shock during
installation,
you must unplug
the refrigerator
from
its electrical
outlet.
• Plug the female
connector
(B) onto the male
terminals on the water valve (4). Either
wire
can go on either
terminal.
TOOLS
YOU WILL NEED
Flatblade andPhillips
Pliers
screwdrivers
1/4" and 5/16" Nutdriver
[] ATrACH THE WATER VALVE
• Locate
the female connector
plug (B).
Sharpknife
• Fasten the water valve to the cabinet edge hole
using the hex-head
screw (13) from the kit.
DO NOT DRILL ANY ADDITIONAL
HOLES.
• Check
the plastic water line nut on the bottom
of
the water valve to be sure it is hand tight. DO NOT
USE TOOLS.
F271NSTALL WATER LINE CLAMP
• Attach
the metal water line clamp (strain relief)
(8) to the refrigerator.
Drive the screw (7) from
the kit through
the clamp (8) at the indent
into
the back of the cabinet.
• The metal clamp is for the house water line (see
the Water Line Installation
Instructions).
It is not
to be used for the tubing
from the water valve up
to the icemaker.
24
Advertisement
