Download Print this page

GE GBS2OKB Owner's Manual And Installation Instructions page 41

Icemaker accessory kit

Advertisement

Installation Instructions
[] POWER CORD ADAPTER
There are two power cord adapters
included
with the
kit; be sure to use the one specified
in the Parts List
on page 7. Plug the female end of the power cord
adapter (20) onto the male terminals
on the icemaker
power cord. When connecting
the adapter
to the
power cord, make sure the seal is in place between
the connectors.
Secure the power cord adapter
to the
icemaker
by putting it into the hook at the back of the
icemaker
and attaching
it to the icemaker
with a
wire de (22).
[] INSTALL THE ICEMAKER FILL CUP
Install the icemaker Fill cup (side-mounted)
(18) into
the icemaker as shown.
@
[] MOUNT THE ICEMAKER
• Lift the icemaker
so the fill tube extension
(10)
fits in the fill cup opening
(C). Hang
the
icemaker
on the two mounting
screws (A).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube extension
(10) is still in the fill cup
opening.
(Check
the rear of the refrigerator
to
make sure the fill tube has not been pushed
out
of the back of the refrigerator.)
• The icemaker
mounting
screws are located
in
the uppermost
position
of the mounting
slots.
THEN TIGHTEN
THE ICEMAKER MOUNTING
SCREWS SECURELY.
[] INSTALL
THE ICE BUCKET
Put the ice bucket in place
under
the icemaker.
Make sure the icemaker
power switch is set to
0 (off).
[] PLUG IN THE ICEMAKER
Holding
the icemaker
in place, insert the power
cord plug into the socket, making
sure that the
prongs and holes are matched.
Press the plug firmly
into the socket. Lock the plug in place by clipping
the restraints
onto each side of the plug. Make sure
the restraints
click into place.
[] ATFACH WARRANTY LABEL
I
A label (9) is provided
with this kit to record
the
I
date of installation
for warranty
purposes.
Apply it to
the back of the refrigerator.
[]
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker
installation
inside the freezer is now
complete.
Condnue
to the Water Valve Assembly
section.
35

Advertisement

loading